AIC SB302-LB, Руководство пользователя

Страница: 17 / 101

7
Chapter 2. Hardware Setup SB302-LB User Manual
2�1 Central Processing Unit (CPU)
2�1�1 Removing the processor
Step 1 Remove the heatsink. The heatsink is attached to the server board or
-processor socket with captive fasteners. Use a #2 Phillips* screwdriver
to loosen the screws x 4 located on the heatsink corners diagonally using
the following procedure (1a) to (1b).
(1a) Use a #2 Phillips* screwdriver and start with screw 1 and loosen it
by giving it two rotations and stop (see letter A).
CAUTION
Do not full loosen.
(1b) Proceed to screw 2 and loosen it by giving it two rotations and
stop (see letter B). Similarly, loosen screws 3 and 4. Repeat steps A and
B by giving each screw two rotations each time until all the screws are
loosened.
(1c) Lift the heatsink upward (see letter C).
Chapter 2� Hardware Setup
REM
OVE
REM
OVE
LGA20
11-3
** SUP
PLIER
IDENT
IFICAT
ION H
ERE **
INSTA
LL PRO
CESSO
R BEF
ORE
REM
OVING
COVE
R
SAVE A
ND RE
PLAC
E COV
ER
IF PRO
CESSO
R IS R
EMOV
ED
Processor
Socket
2
3
1
4
A
B
C