iii
• Place the power cord out of the way of foot traffic. Do not place anything over the power
cord. The power cord must be rated for the product, voltage and current marked on the
product’s electrical ratings label. The voltage and current rating of the cord should be
greater than the voltage and current rating marked on the product.
• If the equipment is not used for a long time, disconnect the equipment from mains to avoid
being damaged by transient over-voltage.
• Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
• If one of the following situations arise, the equipment should be checked by service
personnel:
1. The power cord or plug is damaged.
2. Liquid has penetrated the equipment.
3. The equipment has been exposed to moisture.
4. The equipment does not work well or will not work according to its user manual.
5. The equipment has been dropped and/or damaged.
6. The equipment has obvious signs of breakage.
7. Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid
or detergent for cleaning. The use of a moisture sheet or cloth is recommended for
cleaning.
• Module and drive bays must not be empty. They must have a dummy cover.
1. Equipment intended for installation in Restricted Access Location.
2. The product installation position less than 1 m in height from the supporting surface.
3. The product don’t support redundant function under 180 voltage AC inlet.
Product features and specifications are subject to change without notice.
CAUTION :
risk of explosion if battery is replaced by an incorrect type.
dispose of used batteries according to the instructions.
After performing any installation or servicing, make sure the
enclosure are lock and screw in position, turn on the power.