9
Chapter 2. Hardware Setup
RSC-4BT User Manual
2�3 Removing and Installing the Power Supply Unit Module
2�3�1 Removing the Power Supply Unit
Step 1
Remove power cables connected to the PSU module. Wait a few minutes for the fan
to spin down.
Step 2
Push the latch then hold the tray handle tab. Then pull the module gently until it 20\
slides out of the enclosure.
2�3�2 Installing the Power Supply Unit
Step 1
Slide in the power supply unit.
Step 2
Make sure the latch on the module is fully hooked onto the power supply housing.
