manualshive.com logo in svg

AIC HP201-AG, Руководство пользователя, Страница: 81 / 83

Поделиться
Скачать
AIC HP201-AG Скачать руководство пользователя страница 81

72

Chapter 5. BMC Configuration Settings

Maintenance 

Description

Backup 

Configuration

1.  Click Check All to backup the selected configuration items. The Backup 

Configuration page will appear Click Download Config to save the backup 

file to the client system.

2.  Click OK to perform the backup action. The Backup file will be saved in the 

client system.

3.  Click Cancel to cancel the backup process.

Firmware Image

Location

1.  Click the configuration items on the list.

2.  Click 

Save

 to save any changes made.

Firmware 

Information

Read only.

BMC Recovery

1.  Choose Enable/Disable to start auto-recovery immediately at next reboot.

2.  Enter the number of retries to reset the BMC and this count ranges from 1 

to 5.

3.  Enter the number of retries to recover firmware image during the recovery 

process and This count ranges from 1 to 5.

4.  Address of the server where the firmware image is stored. 

•  IP Address made of 4 numbers separated by dots as in xxx.xxx.xxx.

xxx. 

•  Each number ranges from 0 to 255.

•  First number must not be 0.

5.   Enter the Image Name to edit the default recovery image name is 

mentioned as rom.ima.

•  Image name should contain only 10 characters.

Firmware Update

This wizard takes you through the process of firmware upgradation. A reset    

of the box will automatically follow if the upgrade is completed or cancelled.  

An option to Preserve All Configuration is available. Enable it, if you wish to 

preserver configured settings through the upgrade.

Click 

Start Firmware Update

 to start the firmware update process.

Preserve 

Configuration

This page allows the user to configure the preserve configuration items, 

which will be used by the Restore factory defaults to preserve the existing 

configuration without overwriting with defaults/Firmware Upgrade 

configuration.

Click 

Save

 to save any changes made.

Restore 

Configuration

1. Click 

Upload

 to restore the backup files.

2. Click 

OK

 to upload the new configuration file and restore.

Restore Factory 

Defaults

1. Click the configuration items on the list to preserve the settings during  

     restore factory default configuration.

2. Click 

Restore Factory Defaults

 to restore the factory defaults of the device 

     firmware.

System 

Administrator

Modified administrator account information

Содержание HP201-AG




















































































Отзывы:

Нет отзывов