AIC AIC-30, Руководство пользователя

Страница: 25 / 26

BACKUP SYSTEM
1. The unit is equipped with a backup system. It requires 2 ‘AAA’ size
batteries. Insert the batteries into the battery compartment and make sure
the positive and negative (+ or -) sides of the batteries are in contact with
the corresponding terminals in the battery compartment.
2. In the event of power failure or disconnection of the power cord, the power
supply is auto-matically switched to the backup battery, keeping the time
and alarm settings.
3. To open the battery compartment, press the battery cover from the side
and pull it.
4. When replacing the battery, do not disconnect the power adapter.
Otherwise, all clock and alarm settings will be lost.
SETTING TIME
1. Press and hold the TIME button for 2 seconds to enter the clock setting
mode.
2. Press the HOUR or MIN button to select 12H or 24H hour format. Press the
TIME button to confirm.
3. Press the HOUR button to set the hour and MIN button to set the minute.
Press the TIME button to confirm.
SETTING THE ALARM 1
1. Press and hold the AL 1 button for 2 seconds to enter the alarm 1 time
setting mode.
2. Press HOUR to set the hour and MIN button to set the minute. Then press
the AL 1 button to confirm.
3. Press HOUR or MIN button to select h or n. ( note: h-----buzzer volume is
high, n-----buzzer volume is low.)
4. Press the AL 1 button to confirm.
5. Press the ALARM 1 button to turn on the alarm 1 function till the alarm 1
indicator appears on LED display.
SETTING THE ALARM 2
1. Press and hold the AL 2 button for 2 seconds to enter the alarm 2 time
setting mode.
2. Press HOUR to set the hour and MIN button to set the minute. Then press
the AL 2 button to confirm.
3. Press HOUR or MIN button to select h or n. ( note: h-----buzzer volume is
high, n-----buzzer volume is low.)
4. Press the AL 2 button to confirm.
5. Press the ALARM 2 button to turn on the alarm 2 function till the alarm 2
indicator appears on LED display.
( note: the buzzer is located at the bottom of the unit, please make sure that
nothing will cover the buzzer while using the alarm function.)
TURNING THE ALARMS ON OR OFF
When the display shows clock time, press AL 1 – or AL2 button to enable or
disable the respective alarm. The corresponding Alarm 1 or Alarm 2 indicator
will be on when the alarm is enabled.