7.
Product Usage
Function of Action Button:
7.1
All functions of each trigger:
Trigger
Description
Power On
In the network:
1. The LED turn on 5 seconds then turn off.
2. Send battery report and Wakeup Notification.
Not in the network:
1. The LED will turn on 1 second then turn off.
2. Add for inclusion(Z-Wave SmartStart Inclusion):
a. Add 4-in-1 Motion Sensor DSK into the primary controller
Z-Wave SmartStart Provisioning List (If you don’t know
how to do this, refer to its manual).
b. The 4-in-1 Motion Sensor Power on again.
c. The 4-in-1 Motion Sensor will send “Explorer Auto
inclusion” frame to start Z-Wave SmartStart Inclusion.
d. The 4-in-1 Motion Sensor LED will blink, If the inclusion is
successful, then LED will keep on 2 seconds. Otherwise,
the 4-in-1 Motion Sensor will repeat the process from
step c automatically.
Note: The 4-in-1 Motion Sensor included via “Z-Wave
SmartStart” inclusion, if failing Z-Wave network inclusion or if
an error occurred during S2 bootstrapping, The 4-in-1 Motion
Sensor will reset itself to factory default by sending “Device
Reset Locally CC” .
Quick Response Code (QR Code):
The first 16 bytes of the ECDH Public Key and sometimes
additional information is encoded into a QR Code graphic.
When referred to in this document, “DSK” applies to the Full
DSK, the combination of Full DSK and QR Code, or the
combination of Pin Code and QR Code. Please refer to the
below diagram. The QR code can be found on the bottom of
the sensor.
Short press one time
1.
Send Security Node Info frame.
