104
(0x68)
4
0x15180
The interval time of sending the battery level
reporting. if setting to
0
then the
battery level
reporting
is disabled
1. Valid values:
0x00-0x28DE80
2. The minimum interval time is 1 minutes. For
example, if the value is set to be more than 1 and
less than 60, the interval time is 1 minutes, if the
value is set to be more than 60 and less than 120,
the interval time is 2 minutes.
110
(0x6E)
1
0
Enable 111 ~ 114
temperature/humidity/luminance/ battery level
change reporting.
0 = Unable
1 = Enable
111
(0x6F)
2
0x000A
Configuration temperature change threshold.
Valid values:
1-500(unit 0.1
℃
)
112
(0x70)
1
0x05
Configuration humidity change threshold.
Valid values:
1-32(unit %)
113
(0x71)
2
0x0096
Configuration luminance change threshold.
Valid values:
1-65528(unit lx)
114
(0x72)
1
0x0A
Configuration battery level change threshold.
Valid values:
1-100(unit %)
8.
Attention
1.
If need to clean the sensor, please use a soft cloth with a little alcohol to wipe it after you cut off the
power.
2.
This product is just for indoor use.
3.
Replace the battery timely on low battery warning to ensure the detector works properly. Please
remove the battery and safe keeping, if you don’t use this product for a long time.
4.
This device can be mounted on the wall only, it cannot be installed on the ceiling.
5.
The reference range template of PIR detection is tested at the indoor temperature (the range is 20
℃～
25
℃
)
，
the target of the test is 77kg
±
10kg weight and 1.71m
±
0.3m height, the target of the test
across movement speed is 4m/s
±
0.15m/s.
6.
In order to prevent the PIR sensor’s abnormal fault, please don’t mounting and operating sensor in the
bellow conditions,
Firstly, product mounting should prevent installed in the air flow environment such as in front of the
door, window, heater, air conditioner and so on.
Secondly, the PIR detection area should not be shielded by other screen.
