ahn myLab HC-01, Инструкция по эксплуатации

Страница: 8 / 16

P1 TIME P2
RPM
RCF
STOP
OPEN
RPM
RCF
TIME
START
1
2
3
4
5
6 7
8
Item
Name Function
1
Displays the RPM value during the operation
RCF
2 Displays the RCF value during operation
5 TIME BUTTON
Single press button to select TIME mode. Press “+”
or “-” to increase or decrease the values
+/-
8
It is used to increase and decrease speed and
time values
RPM
3 START BUTTON
Press button to START the centrifugation.
STOP/OPEN BUTTON
Press button to STOP the ongoing operation. Lid
opens automatically, after rotor comes to a stop.
4
P1
6
To enter preset mode press “P1" long press to exit
the mode
P2 7
To enter preset mode press “P2" long press to exit
the mode
5
9. USER INTERFACE & DISPLAY
10. ROTOR INSTALLATION
ROTOR REMOVAL AND REPLACEMENT PROCESS
The rotor comes pre-installed with the centrifuge. If you want to remove or replace
the rotor, follow the instructions below.
REMOVING THE ROTOR
1. Do not remove or loosen the rotor lid before attempting to remove the rotor.
2. Using the T - Allen Key, loosen the rotor nut by turning it counter clockwise. Do not
try to pull the rotor, the rotor will come up automatically.
3. Once the rotor nut is loosen completely, pull up the rotor vertically.