6(9)
25.2.2015
Picture 3.
Attaching the pole to the stage
The pole and the metallic base plate both have alignment marks for aligning the bolt holes
(picture 3). Make sure that the alignment holes indicated by the upper arrows (picture 3)
are aligned properly.
If you want to lock the stage of the spinning model to a static position, align the alignment
holes with the lower bolt hole.
Screw the bolts of the pole (5 pcs) to their holes according to the picture (picture 4) with
the ball end of the hex wrench. Tighten the bolts to appropriate tightness with the other
end of the wrench.
Picture 4.
Installing the bolts
