Page 4 of 17
The viscosity of some preservatives depends on the temperature.
They become more viscous at cold temperatures and less
viscous at hot temperatures, which is why it is necessary to
measure the pump volume in litres.
Use the provided weld-on tubes to fix the nozzles on the screw conveyor.
The provided tension springs are pulled around the screw conveyor tube
and hooked in on the other side.
The dosing device must be rinsed with water from time to time. The
same applies when the device has not been used for several days. At
the beginning of the frost season, the device must be topped up with
antifreeze.
Wear acid-resistant gloves, safety glasses and a respiratory mask
during all work. Your safety is of paramount importance. When
working with preservatives, always have a bucket of clear water
within reach. In the event of an accident, you will thus be able to
rinse the affected body parts immediately.
It is imperative to read the safety data sheets of the respective
preservatives and to observe the manufacturer
'
s instructions!
