Ahlborn ALMEMO 2590-2A, Руководство по эксплуатации

Страница: 36 / 80

36
12.
FUNCTION MENUS
To manage individual tasks each measuring
menu can be assigned a function menu from the
adjacent list. For each measuring operation you
can at any time toggle between measuring menu
and function menu.
To call up function menu selection in menu selection see 10
or in measuring menus and function menus press key(s) :
< FCT >
To select function menu press key(s) :

and

or
PROG
To clear the function menu press key(s) :
< CLR >
Navigation through several function menus :
< ►F > or < F◄ >
To toggle between f unction menu and m easuring menu: < M◄◄ >
and
< ►► F >
12.1
Maximum, minimum, individual values memory
The function menu
max, min, individual values
memory
shows not only the measured value but
also the continuously acquired maximum and min-
imum values for the selected measuring point plus
a memory for 100 individual values.
Maximum value, minimum value :
Function Min and Max :
Min: 25.37 Max: 31.34
To clear select the function (see 9.4):
Min: 25.37 Max: 31.34
To clear maximum, minimum, and average values for all channels press : <CLRA>
As soon as you clear the memory, the current measured value will appear (be-
cause measuring is continuous). Each time a measuring operation starts, if the
device has been so configured, the peak values will be cleared ; (for default
setting see 14.8).
Individual values memory
Each measured value can be saved at the touch of a button. The measured
value is displayed together with its units and position number in the
memory
function. Either just the last value or the whole memory can be cleared. All saved
data can be shown on the display or output as a list to the interface.
To continuously save the measured value press key :
<MEM>
Memory display with position :
Memory: P12: 25.45 °C
To clear the last position after function selection press key :
<CLRP>
To clear all saved values press key :
<CLRM>
To display all saved values press key(s) :
<LISTM>
and
<F ► >
To output all saved values press key :
<PRINT>