Ahlborn ALMEMO 2590-2A, Руководство по эксплуатации

Страница: 16 / 80

16
6.
INITIAL COMMISSIONING
Sensor connection Connect the sensor to any socket
M0
to
M3
(1)
; see Ch 8.
Power supply via batteries or mains adapter to
DC
(3)
; see 7.1, 7.2
To switch ON press the
ON / PROG key
(6) ; see 7.5
Automatic display of last measuring menu see Ch 11.
To call up menu selection
press key(s) :
<MENU>
To activate / deactivate display illumination : <*ON>
To select measuring menu
Sensor display
; see 9.1
press key(s) :
<F> : ▲ / ▼
...
To call up the menu press key(s) :
► or PROG
To select a measuring point
(see 11.1.1)
press key(s) :
<M> : ▲ / ▼
...
All channels on the connector or those functions needed
for measured value calculation are displayed.
To call up the functions menu list :
< FCT >
To select the functions menu (see 9.4)
press key(s) :
<F> : ▲ / ▼
...
To call up the menu press key(s) :
► or PROG
e.g. Functions menu
Data logger functions
:
(only possible if storage medium available)
Once-only saving : see 12.5.4
< MANU >
Cyclic saving : see 12.5.5
To select
cycle timer
press key(s) :
PROG , ▲ / ▼ ...
Entering the cycle (
hh:mm:ss
)
PROG , ▲ , PROG ..
To set the output format :
< FORM> ...
To terminate programming mode :
< ESC>
To start a measuring operation
<START>
To stop a measuring operation
<STOP>
Memory output via interface to computer :
- Connect peripheral device via data cable to socket A1 (2) ; see Manual, Section 5.2
To select
free memory
press key(s) :
PROG
,

...
Output memory
; see 12.5.7
< PMEM> or command ´P04´ from the computer
Clear the memory ; see 12.5.7
< CMEM > or command ´C04´ from the computer
Important keys : To return as far back as menu selection,
press key(s) : ◄ ..., To go to the measuring menu : < M ◄◄ >
