AHA AHALTM-192W, Руководство пользователя

Страница: 8 / 26

8
⑤ USB
① Power
④ Audio-in
(option)
②
DVI-D
(option)
③
VGA
Connecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipments are off.
2. Connect one end of the power adapter to the power connector; plug one
end of the AC power cord into the power adapter, and then the other end
into an electrical outlet (
①
).
3. Connect the VGA signal cable to the 15-pin connector of your host
computer and tighten the screws (
③
).
4. Connect the Audio-In cable from audio input port of your display to the
Audio-out port of your computer (
④
).
5. Connect the USB signal cable to the USB connector of your host
computer (
⑤
).
6. Connect the DVI-D signal cable to the DVI-D connector of your host
computer(
②
).
7. Turn on your computer and display.
To ensure the LCD display can work well with your computer, please configure the display
mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make
suretiming of the display mode is compatible with the LCD display.
We have listed the “Compatibility Modes” of this LCD display in appendices for your reference.
Notice: