AgXcel Muller ISO, Быстрая настройка

Страница: 1 / 17

PO Box 1611
Kearney, NE 68848
877.218.1981
www.agxcel.com REV81922
Quick Start Setup Instructions for Müller ISO
RCM - Single Product
PLEASE NOTE: Your setup may vary. Not all screens are shown. See
Müller Operator’s Manual for safety information and additional
setup/operating information.
Master Switch
•Master Switch to turn
on and off system when
physical Master Switch is
not enabled
Configuration
• Advance Settings
• Speed Settings
• Distance Measurements
• Section Configuration
• Diagnostics
Tank
• Refilling Tank
• Emptying Tank
Rate Adjustment
• Rate Target
Selection
• Auto/Manual
• Rate Increase/
Decrease
Road Mode
•
Road Mode function is
used for safe transport
on public roads
Next Page
• Displays
further function
icons
Counters
•
This opens a screen
with counters.
Sections
•Opening and
closing section
valves from left
to right or from
right to left
Müller - Elektronik ’ technology is a very flexible control plat form with many capabilities. This quick start setup guide will show you
th e necessary steps to setup your display to control AgXcel’ s Fertilizer Pump Systems. Follow the general directions in your Müller's
User Manual (especially under Configuration and Liquid Rate Control ). This manual will show you the specific numbers and settings
to use with your AgXcel Fertilizer Pump System .
MENU STRUCTURE FOR LIQUID RATE CONTROLLER
On the Next Page…
System Information
Virtual Terminal (VT)
When your Müller ISO Liquid Rate Controller is correctly connected, it will be discoverable in your monitor's Virtual Terminal
section. Select the Virtual Terminal icon, which can be in different areas of the controller.
•
From the “ Home ” screen, press the “ VT ” or “ ISO ” icon on the bottom of the screen, which will take you to the Virtual
Terminal
screen.
•
Once on the Virtual Terminal screen, your Müller ISO module will be detected. Once detected, it will load your current
configurations. If this is your first time setting up, it will display a message letting you know that system has not been
configured.
AGXCEL,
LLC