Basic features.
Your Aguri Speed Vision DX20 DVR comes as standard with all features set to their optimum settings, however the unit has certain user
selectable features you can change to suit your own requirements.
Switching views and entering the Setting menus.
You can switch between two different views; full screen speed trap detection mode and a combined view of speed trap detection and
video. Use the Menu button to switch between the two different views as well as to enter the Settings menu and the Additional
Settings menu.
Power on/off
Your DX20 will power on and start to record automatically as soon as it is connected to power. You can also power it on and off
manually. Press the power button for 1 second to power on, press and hold the power button for 2 seconds to power off.
Video/camera mode
You can only take photographs when your DX20 is not recording. To stop the unit recording and switch to camera mode press button
#4, the Video Record/OK button. The LCD will now display a ‘camera’ icon over button #3. To take a photograph whilst in camera mode,
press button #3. To switch back to video mode and to start recording video again, press the Video Record/OK button again.
Audible recording (Mic on/off)
When recording video you have a choice of whether you want to have the mic turned on to record audible sounds within your vehicle
or to record video only with no sound. To turn the mic on and off press button #2, the Video Playback/Up/Mute button. The Mic icon
on the LCD display will change to confirm your selection. To turn the Mic back on, press button #2 again.
Emergency SOS function
If you want to ensure you save and lock a section of video, for example, during an emergency or after an accident, press button #3, the
Camera/Down/SOS button whilst the device is recording. The section of video just recorded will be locked and saved in the Event folder
of the SD card so that it will not be deleted or automatically over-written.
Automatic video and event recording.
Your DX20 DVR has been designed to be as simple to use as possible. The purpose of a DVR is to continually record the road ahead and
to automatically record and save any incidents or accidents you might be involved in. To ensure that your DX20 does this as efficiently
as possible, it will always power up in to video mode and begin recording automatically. Simply connect your DX20 to a power source
that comes on when you start the engine of your vehicle, and DX20 will start recording automatically without you having to remember
to touch a button.
6.
