DNP16-01
MANUAL FOR INSTALLATION AND USE
By: E. Irazu.
Reviewed by: J. Fernández
DNP16-01. PIVOTING BUFFER SUPPORT
BRAND PRODUCT
DEPARTMENT
2
Rev:2
3)
COMPONENTS OF THE KIT.
The kit consists of the vertical buffer support and a bag of accessories with a set of chocks and fixtures to
support possible drops and compensate depth X to the fixation wall. The bag contains pieces for a regulation
5-30 (at 5 mm intervals) interspersed with a selection of chocks between the buffer support and the wall, and
35-80 (continuous mm regulation) through the use of fixtures.
VERTICAL BUFFER SUPPORT KIT
(VERTICAL BUFFER
SUPPORT)
(BAG OF ACCESSORIES)
The bag of accessories includes the
items necessary to be able to
support the position of the buffer
support against the wall to between
5 and 80 mm (at 5 mm intervals) and
the lateral support used for the
mounting and correct positioning of
the buffer support over the buffer:
- 2x lateral supports
- 4 x adjustable wall fixtures
- 2 x 5mm chocks
- 2 x 10 mm chocks
- 4 x 30x30x10 rings
- M8x22 screw.
- 8 x M8 bolts.
- 4 x washers
- 2 x clamp rings
