Agu Skinny, Руководство пользователя

Страница: 7 / 42

7 EN
SAFE OPERATION INSTRUCTIONS
• The device should be used only for its intended pur-
pose in accordance with this instruction manual.
• Any modification of the device is prohibited.
• Do not allow the child to play with the device. This de-
vice is not a toy and is not intended for games!
• Do not disassemble the device.
• Do not expose it to direct sunlight, high or low temper-
ature, moisture or dirt.
• Do not allow penetration of any solutions into the device.
• Replace the battery as needed. When the battery is
low, you will receive a notification in the application.
• The device is not waterproof and can not be used to
monitor the temperature of liquid.
WARNING
One-sided stickers and double-sided stickers for
Smart Temperature Indicator
AGU STI2
are dispos-
able and cannot be reused.
Do not use stickers for temperature monitoring for
children with skin hypersensitivity and/or prone to
allergy.
The recommended time of the fixative stickers use
on skin is 12 hours maximum. Use another sticker
no earlier than 6 hours after removing the previous
one when fixing it on the same skin area. In case of
long-term temperature monitoring for children (over
12 hours), it is recommended to interchange fixation
of the indicator under the right and left underarm.
GUIDELINES FOR FIXATIVE STICKERS APPLICATION
Always fix the sticker on clean, dry, intact skin with no tension.
Do not fix the sticker with tension. It can injure skin. Make
sure there are no folds when fixing the sticker.
REMOVING FIXATIVE STICKERS
Gently lift the sticker edge when removing the one-sided
sticker, grasping it along the width and pull it back slowly,
7