Installation & Operation Manual Merlin GDP2X
AGSGDP2X - IOM Iss: 3 03-20
9
Settings Menu
The GDP2X has a touch screen which allows the engineer/ user to configure the system.
Adjust the screen brightness. Change/Select option
Press or slide the cursor up and down. Press the blue option box or press and hold.
When changes have been made – turn the SETTINGS switch OFF and the system will restart.
Settings Options Explained
FUNCTION
OPTIONS
Explanation
BMS relay ON/OFF for-
- Gas
- Error
Gas changes relay state with gas valve status only.
Error changes relay state upon all alarm messages.
Auto Start-
- ON
- OFF
In the event of a power loss - the GDP2X will restart
automatically when power is restored, or not.
Factory Set Condition
BMS relay ON/OFF for-
- Gas
Auto Start-
- OFF
Trouble Shooting
Fault.
Possible Cause/Correction.
Detector not responding.
o
Incorrect wiring.
o
ID switches not properly configured.
o
Termination switches not set up correctly.
Service message
o
Detector requires service – contact supplier.
End of Life message
o
Detector requires replacement – contact supplier.
