2
© Agrowtek Inc. | www.agrowtek.com
Technology to Help You Grow
AGROWtEK
U.S.A.
MADE IN
© 2016 Agrowtek Inc.
www.agrowtek.com
GrowControl
DigiClimate Canopy Sensor
TM
TEMP
RH
LIGHTC
O2
if equipped
KEEP
FAN
FILTER
CLEAN
Intake Fan
& Filter
Light Sensor
GrowNET/MODBUS Port
RS-485
Power Jack
or Mini-Din
6-pin Analog
Exhaust
Slost
Stainless Steel
Hanging Bracket
WiFi Antenna
if equipped
Wall Mounting
Slots
WiFi AP Mode Reset
Wall mounting slots are provided for installing against a vertical wall surface, or a hanging bracket is avail-
able for conveniently suspending the sensor from a wire or cable in the middle of the environment. Note the
location of the light sensor (top.) Sensor should be installed with the light sensor facing up.
Install in locations with adequate access to the environmental conditions and away from extreme influences
such as ventilation ducts, doorways, windows or heat generating equipment such as lights and ballasts.
Installation Instructions
Do NOT connect the GrowNET port to Ethernet networks.
Disconnect power while making connections to
prevent damage to any components.
