Agromehanika AG-TRONIK S1, Инструкция по эксплуатации, Страница: 35 / 50

AG-TRONIK
35
6.3.2. Spraying
•
Check the minimum speed (MS) before starting the journey and change it if necessary.
•
Turn on the section valves , and move to the starting point of spraying.
•
Check that the automatic mode is on and start spraying.
•
At the moment we start driving, the main valve is opened, and AG-TRONIK ensures that
the desired hectare consumption is achieved as soon as possible.
•
If MS is set correctly, AG-TRONIK ensures the automatic opening/closing of the main valve.
•
At the end of the row, when the speed is reduced below the MS, the main valve is automatically
closed.
•
The main valve re-opens when the spraying speed exceeds the set minimum speed.
6.3.3. Completion of spraying
•
Immediately after spraying, vital parts should be thoroughly cleaned and rinsed with water.
•
Pour clear water through the system for a short time (3-4min).
•
This way we make sure that the machine will work for a long time properly.
•
WARNING! In the event of a breakdown of vital parts due to irregular maintenance of the
sprayer, Agromehanika does not take any responsibility!