7
Do not install any equipment or attachments made by other manufacturers or any which are
not specifically authorized by Shandong Kadekor Power Machine Co.,Ltd for installation
without first obtaining the written permission from Shandong Kadekor Power Machine
Co.,Ltd.
Never work underneath the excavator unless it is safely resting on the ground and /or is
properly blocked and supported and /or it is properly blocked and supported.
Never use damaged or insufficient wire ropes, sling or chains. Always wear gloves when
handling wire ropes.
Never reach into bore during attachment installation or removal. Never align bores with your
fingers or hands. Use proper alignment tools when installing, changing or servicing
attachments.
Keep objects away from the radiator fan. Rotating fans will swirl and throw out objects,
which can become very dangerous and cause severe injury to yourself and others.
Avoid contact with any components containing coolant. At or near operating temperature, the
engine coolant is hot and under pressure and could cause severe burns.
Check the coolant level only after the radiator cap is cool enough to touch. Remove the
radiator cap slowly to relieve pressure.
Do not allow your skin to come into contact with hot oil or components containing hot oil. At
or near operating temperature, engine and hydraulic oil is hot and can be under pressure.
Always wear safety glasses and protective gloves when handling batteries. Keep sparks or
open flames away!
Never permit anyone to hand guide the bucket or grapple into position.
When working in the engine area, make sure the top covers and side doors are properly
secured or closed with the appropriate supports.
FIRE AND EXPLOSION PREVENTION
Always turn off the engine while refueling the excavator.
Never smoke or allow an open flame in refueling area or where batteries are being charged,
or where batteries or flammable materials are stored.
Always start the engine as described in the Operation and Maintenance Manual. Check the
electrical system regularly and frequently. All defects, such as loose connections, burnt out
fuses and bulbs, burnt or damaged cables must be repaired immediately by an electrician or
especially trained personnel.
Never store flammable fluids on the machine except in storage tanks intended for the
Excavator’s operation.
Inspect all components, lines, tubes and hoses for oil and fuel leaks and/ or damage. Replace
or repair any damaged components immediately. Any oil, which escapes from leaks, can
easily cause a fire.
Be certain that all clamps, guards and heat shields are installed. These components prevent
vibration, rubbing, chafing and heat build-up. Install tie wraps to fasten hoses and wires, as
required.
Cold start ether is extremely flammable. Use ether only in ventilated areas and as directed.
Never use it near heat sources or open flames, do not permit anybody to smoke.
https://tractormanualz.com
