34
2.1.4.3.
Mechanical adjustment of the depth of the bolt safety blades
The working depth of the blades can be adjusted
manually without affecting the working depth of
the disks.
Each of the blades must be adjusted in the same
way.
There are 6 different positions between the
minimum and maximum height.
2.1.5. Starting up the TRAILED MAXIMULCH
To adjust the working depth on a folding MAXIMULCH, there are two main adjustments:
1st adjustment:
CHANGING THE ROLLER'S POSITION
Changing the roller's position to increase the working depth:
1. Raise the machine into "Transport" position to release the roller arms'
pressure on the multistop upper stop pins.
2. Place the multistop upper stop pins in a
higher
position. (e.g. if the
pins are in position 4, the pin must be put in position 5).
Multistops
Maximum depth
Minimum depth