23
Do not clean the electrical and hydraulic components.
Never direct the high-pressure washer or steam cleaner nozzle directly at the
lubrication points or bearings.
Systematically keep the nozzle a reasonable distance from the machine.
Comply with the rules for using high-pressure washers.
Wear appropriate personal protective equipment for the work to be performed. In particular,
wear safety shoes and gloves to handle sharp parts.
Take all of the necessary precautions when fitting working parts that are both heavy and sharp.
The machine must only be serviced and repaired by competent persons who are familiar with the
machine's features and operating procedures.
The machine must only be repaired with genuine AGRISEM International spare parts.
For bare metal parts, use either an anti-rust product that leaves a greasy film or thick grease.
According to the type of machine: before carrying out any work on the electrical circuit or before any
welding operations, disconnect the wiring harnesses coming from the tractor. Disconnect the battery
and alternator cables.
Do not weld or use blow torches near pressurised fluids or inflammable products.
2.3.1.6.
Instructions regarding installation
The machine may be fitted with electronic components and elements which may be affected by
electromagnetic emissions from other devices. This type of interference may be a source of danger for
people if the following safety instructions are not followed:
If devices and/or electrical components are installed on the machine and
connected to the on-board electrical circuit at a later date, the user must first
check that installing these components will not interfere with the vehicle's
electronics or other components.
Ensure that electrical and electronic components subsequently installed
comply with the current version of electromagnetic compatibility directive
2004/108/CEE and that they have a CE marking.
Before carrying out any operations on the electrical system, disconnect the battery's negative terminal.
Only use the recommended fuses. Using fuses which have too high an amperage may damage the
electrical system and create a risk of fire.
Ensure that the battery terminals are correctly connected, starting with the positive terminal and then
the negative terminal. When disconnecting the terminals, start with the negative terminal and then
disconnect the positive terminal.
Systematically fit the cover provided for this purpose on the battery's positive terminal. Be aware of the
risk of explosion when earthing.
