Agrisem Big Boss, Руководство пользователя

Страница: 41 / 90

41
10.2 Safety reminder
- Switch off the tractor engine and remove the ignition key.
- Ensure that all moving parts are stationary before working on the machine.
- Before working, check that all support legs and locking pins are in place. Never place your hands or feet under the
opening discs (in case of sudden lowering of the unit).
- Review Chapter 1 on safety instructions.
10.3 Cleaning
Clean the machine regularly and thoroughly at the end of each season.
IMPORTANT:
Electrical components and fans, as well as hydraulic cylinders and bearings, must not be cleaned with a high-
pressure cleaner or directly with a water jet. The housings, screw connections and bearings are not sealed against
high-pressure cleaning. :
- Clean the outside of the machine with water.
- Blow out the ploughshares, seed lines, seed tank, metering unit and fan with compressed air.
- Rinse components thoroughly after using fertiliser. Fertilisers are very aggressive and cause corrosion.
10.4 Immobilising the tractor unit and machine
Immobilising the tractor unit/machine
Precautions
To prevent damage from moisture, the machine should be parked indoors or under cover if possible When operating the
machine, take the environment into account. Ensure that no one is in the manoeuvring area.
Park the machine on solid ground; if you leave it parked for a long period of time, it is advisable to leave the machine in the
unfolded position or in the working position.
Immobilisation of unfolded implement
1- Follow the steps to unfold the machine, but stop once all working parts touch the ground
2- AT this point it will be possible to lift the drawbar and relieve the weight on the tractor coupling.
3- Turn off the tractor and remove the coupling pin.
4- Check that the tilt cylinders can support the weight of the drawbar. Start the tractor and move forward enough to
disengage the coupling
5- Lower the drawbar to the ground. Fit wheel chocks.
6- Stop the tractor, depressurise all hydraulic lines and remove all hoses and cables from the rear of the tractor. Start the
tractor and drive forwards slowly.
10.5 Storage
If the machine is not to be used for a prolonged period of time:
- If possible, store the machine under a roof.
- Empty the seed and fertiliser tank completely and clean it.
- Reduce the pressure setting on the ploughshares.
- Open the emptying flap.
- Unplug and store the terminal in a dry place.
- Protect the machine against rust.
- Protect the piston rods of hydraulic cylinders from corrosion.