Agrisem Big Boss, Руководство пользователя

Страница: 40 / 90

40
IMPORTANT:
Progressive wear means that the seeding depth must be adjusted.
9 Operating instructions for the control system
The metering units are driven electrically and are powered by the red and black 12-volt harness. The regulation of the
metering units is controlled either by an Artémis ISOCAN RDS control unit or a SeedXconnect touch tablet .
9.1 User manual for the control unit
RDS ISOCAN ARTEMIS
Refer to the RDS control unit user and calibration manual, supplied with the machine if applicable.
9.2 User manual for the SeedXconnect touch tablet
See annex 12.4.
9.3 User manual for A-Touch 800 / 1200
See annex 12.5.
10 Servicing and maintenance
10.1 Disc and hub assembly
10.1.1 18’’ disc
A new Boss unit disc has a diameter of 18" (approximately 457 mm). This is equipped
with a bevel that facilitates penetration into the soil and the cutting of plant debris (straw)
and living cover, thus greatly limiting the effect of straw trapping in the seed line, which is
harmful to seeding.
Discs should be replaced when they reach a diameter of 425mm (133mm between the
end of the disc and the hub) in order to extend the life of the skimmer and maintain a
constant seeding depth. In addition, when the discs reach a diameter of 425mm, the bevel
is normally worn, resulting in a higher risk of straw being caught in the seed line. When
the disc reaches a diameter of 425 mm or less, the seeding ploughshare no longer works
behind the disc and will therefore start to wear much faster (depending on soil type and
working conditions).