Agrimotor B 1006, Руководство пользователя

Страница: 59 / 92

GB
Safety devices
Safety switch for the motor
When the cement mixer is overloaded the
safety switch will turn the motor off. The
safety switch should not be disabled.
1. Unplug the cement mixer from the
electrical circuit.
2. Remove the cause of the overload.
3. Wait 2-3 minutes for the motor to
cool down, then plug in the
appliance and turn on the cement
mixer.
Power cord
Use only HO7RN-F quality rubber cable
with a diameter of 3x1.5 mm
2
.
The type must be indicated on the power
cord.
The maximal permissible length of the
power cord is 50 m.
Do not exceed the proper length of the
power cord. Connecting several
extension/power cords is prohibited.
The power cord, the power plug and the
switch-box should be protected against
accidental splashes of water.
Repairs on the power plug and the switch-
box shall only be carried out by authorised
specialty services or dealerships..
The cement mixer shall not be operated
with a faulty or damaged power cord (e.g.
when its insulation has been cracked, cut,
bruised or broken).
Protect power plugs from moisture.
Danger!
Do not cut or damage the power cord. In
case a damage occurs the following action
should be carried out:
- Unplug the power cord
immediately from the electrical
circuit.
Electricity settings:
- 230 V/50 Hz, AC
- Smallest diameter for the power
cord =1,5 mm
2
- Lower limit of the electrical circuit
= 10A
Symbols used on the appliance and in
the Owner’s manual
Read the Owner’s manual
before operating the machine!
Appliance with protective
insulation (double insulation)!
Danger!
There is a danger of personal injury if
proper attention is not paid.
Attention!
There is a danger of personal injury if
proper attention is not paid.
Note:
Information on the product and
application tips.
59