Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Страница: 57 / 92

5 Maintenance and Repair
Hydrostatic Implement Carrier agria 5900 Bison 57
Diesel engine
Check engine oil level
Before each start-up and after every 8 hours
of operation
•
Only with the engine switched off and on
level ground.
•
Clean the oil filler plug and its environment.
•
Unscrew the oil filler plug, wipe the oil dip-
stick with a clean cloth and reinsert it (do not
screw it in). Remove the oil dipstick and
check the oil level.
•
If the oil level is below the lower "min" mark,
fill in engine oil (see "Technical data") up to
the rim of the oil filler neck "max".
Change engine oil
For the first time after 50 operating hours, then
after every 200 operating hours or annually
(depending on which occurs first). At heavy duty
or high ambient temperature, change the oil
already after 100 operating hours. Change the
oil when the engine is still warm, but not hot -
danger of burns!
•
Clean oil filler plug, oil drain plug and their
environment.
•
Open the oil filling and drain plug, collect the
used oil in a suitable container.
•
Ensure proper disposal of the used oil.
•
Whenever you change the engine oil, clean
the engine oil filter (D/13) with diesel fuel.
Check the sealing rings. Replace if nec-
essary. Tighten the oil drain plug!
Oil filing volume and quality see "Technical da-
ta". If possible, use a funnel or a similar fixture to
fill in the oil.