Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Страница: 55 / 92

5 Maintenance and Repair
Hydrostatic Implement Carrier agria 5900 Bison 55
Change engine oil
For the first time after 5 operating hours, then
after every 50 operating hours or Yearly (de-
pending on which occurs first). At heavy duty or
high ambient temperature, change the oil al-
ready after 25 operating hours. Change the oil
when the engine is still warm, but not hot - dan-
ger of burns!
•
Clean oil filler plug / oil dipstick, oil drain
plug and their environment.
•
Open oil filler plug and oil drain plug, collect
the used oil in a suitable container. Alterna-
tively, you can use a drain pump to suck the
used oil through the filling hole.
•
Ensure proper disposal of the used oil.
Check the sealing rings. Replace if nec-
essary. Tighten the oil drain plug!
Oil filing volume and quality see "Technical da-
ta".
•
If possible, use a funnel or a similar fixture to
fill in the oil.
Air cooling system
After long periods of operation the cooling sys-
tem can be obstructed with dust or plant parti-
cles. Continuous operation with an obstructed
cooling system causes the engine to overheat
and can damage the engine.
Never spray water on the engine. Use a brush or
compressed air.
•
Continually check the fan grille (C/5), and
remove aspirated dirt and plant debris.
•
Remove the fan housing after every 100
operating hours or at least yearly , ideally
before the season. Clean the cooling fins on
cylinder and cylinder head, and the deflector
plates and the fan wheel that are necessary
for air circulation.
- agria-Service -