Agria 9600-80, Перевод оригинальной инструкции по эксплуатации

Страница: 50 / 76

5 Maintenance and Repair
50 Remote-controlled High Grass Rotary Mulcher agria 9600-80
Check crawler tracks for damage
Check the crawler tracks (A/1) for damage with
the ignition switched off and the spark plug con-
nector removed. Start the engine and move the
machine forward, so that you can check the
other part of the crawler tracks.
Keep your hands away from crushing
points when moving the machine!
Switch off the engine and ignition and re-
move the spark plug connector before con-
tinuing the inspection!
Repeat the instructions above, until you have
checked the entire length of both crawler tracks.
Change the crawler tracks if they are damaged.
The crawler tracks must only be changed in a
specialist workshop
or - agria-Service - .
Traction drive generator
Brush contacts on the generator
When working in dusty and aggressive atmos-
pheres, dust and dirt accumulations may devel-
op on the brush contacts.
To prevent premature wear, we recommend that
the brush contacts are checked and cleaned
after every 50 hours of operation by a specialist
workshop and replaced if necessary.
Checking the V-belt tension on the generator
Make sure that the ignition is switched off. The
V-belt is located beneath the engine mount and
can be accessed by opening the side covers on
the engine mount.
Check the V-belt tension after every 25 hours of
operation . For correct V-belt tension see section
below.