Agria 2500 Hydro Скачать руководство пользователя страница 13

Страница: 13 / 70

agria-

Two-Wheel Tractor 2500 Hydro

Use appropriate tyre air pressure for op-
eration with implements.

Re-tighten attachment bolts of drive-
wheels or check tightness when doing
maintenance work.

Electrical System and
Battery

When working on the electrical system,
make sure the battery is disconnected
(negative pole) (for two-wheel tractors
equipped with battery).

Make sure to connect battery properly
– first connect positive pole and then
negative pole. Disconnect in reverse or-
der.

Be careful with battery gases – explo-
sive!

Avoid spark discharge and open flames
near batteries.

Remove plastic cover (if included) to
recharge battery to prevent highly ex-
plosive gases from building up.

Be careful when handling battery acid!

Only use specified fuses. Stronger fuses
will destroy the electrical system – dan-
ger of fire.

Always cover positive pole with speci-
fied cover or terminal cap.

Persons having a pacemaker may not
touch live parts of the ignition system
when the engine is running.

1. Safety Instructions

Explanation of
Warning Signs

Before any clean-
ing, maintenance,
and repair work
shut off the engine
and pull ignition key.

Do not work without
protective covers
mounted. Before
starting the engine,
bring covers in
proper position.

With engine run-
ning, keep at a safe
distance from cut-
ting knife.

Do not touch mov-
ing machinery
par ts. Wait until
they have come to
a complete stop.

With engine run-
ning, keep at a safe
distance.

Signs

When working with the
machine, wear individual
protective ear plugs.

Wear protective gloves.

Wear solid shoes.

Содержание 2500 Hydro







































































Результаты поиска

Содержание 2500 Hydro

Отзывы:

Бренды по названию

Популярные бренды

Agria 2500 Hydro, Руководство по эксплуатации

Результаты поиска

Содержание 2500 Hydro

Отзывы:

Бренды по названию

Популярные бренды