14
STEP 24: (SEE FIGURE 22)
• Remove the nylon tie which fastens the chute crank
rod to the crank rod support tube.
• Assemble the crank rod support tube to the bracket
on the left side of the discharge housing using two
5/16" x 1-1/4" carriage bolts, and 5/16" Nylock nuts.
FIGURE 23
LEFT SIDE VIEW
CHUTE CRANK ROD
CRANK SUPPORT TUBE
TILT CONTROL HANDLE
5/16" x 1-3/4"
CARRIAGE BOLT
BOWED WASHER
5/16" NYLOCK NUT
TILT
CONTROL
ASSEMBLY
STEP 25: (SEE FIGURE 23)
• Attach the chute tilt control assembly to the top side
of the crank support tube using two 5/16" x 1-3/4"
carriage bolts, bowed washers and 5/16" Nylock nuts.
5/16" NYLOCK NUT
5/16" x 1-1/4"
CARRIAGE BOLT
CRANK ROD
SUPPORT TUBE
DISCHARGE
HOUSING
FIGURE 22
LEFT SIDE VIEW
5/16" NYLOCK NUT
CHUTE CRANK
BRACKET
5/16" WASHER
CHUTE
CRANK
ROD
ROD
SUPPORT
BRACKET
5/16" x 1"
CARRIAGE BOLT
SPIRAL
FIGURE 24
LEFT SIDE VIEW
STEP 26: (SEE FIGURE 24)
• Attach the chute crank rod assembly brackets to
the plastic bracket on the left side of the discharge
housing. Align the chute crank bracket beneath the
rod support bracket and assemble both to the plastic
bracket using two 5/16" x 1" carriage bolts, 5/16"
washers and 5/16" Nylock nuts.
Do not tighten yet.
