10
FIGURE 16
STEP 15:
(SEE FIGURE 16)
•
Attach the ends of the lift rod to the lift bracket on the
channel and the welded arm on the frame assembly.
Use two small 1/2" washers (EE) and 1/8" x 1-1/4"
cotter pins (O).
5/16" x 1" CARRIAGE
BOLT (L)
5/16" WASHER (FF)
5/16" NYLOCK
NUT (V)
FIGURE 18
STEP 17:
(SEE FIGURE 18)
•
Attach the skid shoes to the blade using four 5/16" x
1" carriage bolts (L), 5/16" flat washers (FF) and 5/16"
nylock nuts (V). Do not tighten yet.
FIGURE 17
3/8" NYLOCK
NUT (Q)
BLADE PIVOT
BRACKET
PIVOT PLATE
ASSEMBLY
5/16" X 3/4"
BOLT (G)
5/16" NYLOCK
NUT (V)
HANDLE GUIDE
3/8" x 1-1/4"
BOLT (E)
STEP 16:
(SEE FIGURE 17)
•
Assemble the blade pivot bracket to the pivot plate
assembly using two 3/8" x 1-1/4" bolts (E) and 3/8"
nylock nuts (Q).
•
Assemble the handle guide to the frame assembly
using a 5/16" x 3/4" bolt (G) and 5/16" nylock nut (V).
BLADE MOUNT
GUSSET
HAIR COTTER
PIN (KK)
STEP 18:
(SEE FIGURE 19)
•
Align the channel pivot plate assembly behind the
blade and guide the ends of the mounting rod, one
end at a time, into the holes at the bottom of the
blade mount gussets. Secure the mounting rod with
two hair cotter pins (KK).
FIGURE 19
COTTER
PIN (O)
LIFT ROD
1/2" WASHER,
SMALL (EE)
WELDED ARM
