Agri-Fab 190-368B, Руководство пользователя

Страница: 5 / 12

5
FIGURE 6
11. Turn the latch stand bracket so that the aligning tab
is at the rear (bottom) of the bracket. Assemble the
latch stand bracket to the cart using four 1/4" x 1/2"
hex bolts and 1/4" hex nuts.
TIGHTEN. See figure 7.
FIGURE 7
FIGURE 5
9. Assemble the front panel over the end of the cart
using four 1/4" x 1/2" hex bolts and 1/4" hex nuts
as shown in figure 5. Leave two holes shown in
figure 5 empty in the bottom of the panel. Pull the
cart body halves together and
tighten the two
bolts in the bottom of the front panel, then tighten
the bolt in each side.
At this time tighten the three bolts in the bottom of
the cart which were assembled in step 4.
FIGURE 8
10. Assemble the wheel support to the cart using eight
5/16" x 3/4" truss head bolts and 5/16" hex nuts as
shown in figure 6. Heads of bolts go to the inside
of cart bed.
Tighten.
12. Assemble the two corner caps to the front corners of
the cart using four 1/4" x 1/2" hex bolts and 1/4" hex
nuts. Also assemble two 1/4" x 1/2" hex bolts and
1/4" hex nuts to the two rear corners of the cart.
TIGHTEN. See figure 8.
1/4" x 1/2"
HEX BOLTS
1/4" HEX NUT
1/4" HEX NUT
LEAVE HOLES OPEN FOR
LATCH STAND BRACKET
5/16" HEX
NUT
WHEEL
SUPPORT
5/16" x 3/4"
TRUSS HEAD BOLT
1/4" x 1/2"
HEX BOLT
LATCH STAND BRACKET
1/4" HEX NUT
ALIGNING TAB
AT BOTTOM
CORNER CAP
1/4" x 1/2"
HEX BOLT
1/4" HEX NUT
1/4" HEX
NUT