2
3
Outer bolts
1: ASSEMBLING TOW FLAP
NOTE:
Always check ground clearance of flaps. Suggested clearance with a load is
3” minimum to prevent dragging. Install on vehicles with suspension modifications
or oversized tires may exceed suggested clearance. Mud flaps still function, though
performance may be affected.
NOTE:
Ensure decal is on driver side.
NOTE:
Stabilizing bar can be mounted on
either side of tow flap.
A.
Insert (3) Allen button head b
olts through
middle holes in tow flap half, start weld nuts.
NOTE:
Ensure extended threads on weld
nuts are toward closed wall of stabilizing bar.
Allen button
head bolt
Weld nut
Tow flap half
B. Insert weld nut into end cap aligning bolt
holes.
IMPORTANT: Ens
ure extended threads on
weld nut insert into end cap.
End cap
Weld nut
C. Insert end cap assembly into stabilizing
bar
End cap
assembly
Stabilizing bar