Agreto Swis721 LT BT Standart, Руководство пользователя, Страница: 14 / 20

AGRETO Animal Scale
© AGRETO electronics GmbH Seite:14
6.9 Mounting the door operating rod
required mounting material size pieces
ball joint M10 2
washer M10 1
spring washer M10 1
Screw a ball joint to the operating rod on both sides.
Fasten the rod and ball joint in the
middle hole on the front door.
Fasten the rod with the second ball joint
into the hole on the door lever.
Open and close the front door using the lever to test it. When the door is closed, the
door lever must be able to move over the dead centre and rest on the rubber buffer
with a slight tension.
If necessary, you can slightly remove one of the ball joints from the bar.