5.Fundlon Interface of bracelet
5.1 Function area on the main interface
5.1.1 Time mode:
After you successfully pair your watch with the APP for the first time, the
bracelet will synchronize its time and date with your phone.
5.1.2 Step-counting mode:
The bracelet is in step-counting mode by default when powered on.
With the bracelet on your wrist, if you walk and swing your arms, the bracelet will record your
motion data which you can view immediately.
5.1.3 Riding mode:
On the bicycle interface, if you long press the button for 3 seconds, you will
enter the riding mode. In this mode, the bracelet will record your riding time and the calories
you have burned.
To exit the riding mode, long press the button for 3 seconds in the riding mode.
5.1.4 Heart rate detection:
On the heart rate detection interface, if you long press the button,
you can use the heart rate detection function to detect your real-time heart rate dynamically. In
the heart rate detection mode, the bracelet 's battery life will be shortened. In the movement
interface to measure the heart rate of data in the home page to view, do not save the history of
the bracelet
To exit the heart rate detection mode, long press the button for 3 seconds in the heart rate
detection mode.
5.1.4.1
Please put on your bracelet on your wrist, 2cm from the inside of your ulnaradius joint.
5.1.4.2
When measuring your heart rate, keep the heart rate sensor clung to your skin and in
good contact. Otherwise, the light of the sensor may leak and the measurement data may be
incorrect. Do not look directly at the green light of the sensor, which may cause discomfort to
your eyes.
