manualshive.com logo in svg

AGP TC100, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
AGP TC100 Скачать руководство пользователя страница 7

7

Sintered bits, also known as wet type, are much longer lasting but require operator knowledge 
for best results. Water is absolutely always required with sintered bits. The bit is impregnated 
with many layers of diamond in its metal matrix. As the matrix (bond) wears, new diamonds are 
exposed. If the bit becomes glazed, it can be resharpened by dressing with an appropriate 
alumina oxide or silicon carbide dressing stick. There are many variables with sintered diamond 
core bits, such as diamond grade and type, diamond grit size, bond type, bond hardness, 
and bit wall thickness. Consult with your diamond core bit supplier for the best bit for your 
application. Tiles vary widely in hardness. Granite and porcelain are especially hard. 

2. Water Supply

CAUTION: Never use this machine without water feed. Running dry will overheat and destroy its 
spindle water seals.

Water is a basic requirement for diamond core drilling. The water serves as a coolant to avoid 
the working surface at the tip of the bit from overheating. When the diamond bit becomes 
overheated, even the diamonds break down. The most frequent cause of diamond drill 
damage is drilling without enough coolant water.  

Water should always be used to cool and lubricate the bit and to flush out abrasive particles 

formed while drilling.  

To connect the water supply. Attach the quick-release water coupling to a water hose.  Use 
the water feed valve to adjust water flow as 
needed.

WARNING: Never allow water to enter the motor. It 
could lead to an electric shock. 

WARNING: Check all connections of the water feed 
system to ensure there are no leaks. Inspect hoses 
and other critical parts which could deteriorate.

WARNING: The maximum water pressure should not exceed 70 psi (4 bar).

Use the water collector with a wet vacuum to collect cooling water if nearby objects could be 
damaged by water.

Water Collector

Mount the water collector device to the base using the 
hand knob. Attach the hose of a wet-type vacuum cleaner 
to the vacuum port. The water collector also incorporates a 
centering  aid pointer. When the pointer is opened against 
the spring tension, it indicates the exact center of cut. When 
released, it automatically returns to the stowed position.

Water Valve

Quick-Release 

Water Coupling 

Open

Closed

Spring-Loaded Centering Aid

Open position

Содержание TC100

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды