manualshive.com logo in svg

AGP PM-V06, Руководство пользователя

Поделиться
Скачать
AGP PM-V06 Скачать руководство пользователя страница 42

V06 

 

 

3-9.12  Onchip USB 

This items allows you to Enable or Disable the USB function.    The default value of this item 

is Enabled. 

The choice: Enabled, Disabled. 

3-9.13  USB Keyboard Support 

This items allows you to Enable or Disable the USB keyboard function.   

    The choices are: Disabled, Enabled. 

3-9.14  OnChip Sound 

This item allows you to control the onboard AC97 audio.     

The choice: Auto, Disabled. 

3-9.15  OnChip Modem 

This item allows you to control the onboard MC97 modem.     

The choice: Auto, Disabled. 

3-9.16    CPU to PCI Write Buffer 

When this field is Enabled, writes from the CPU to the PCI bus are buffered, to compensate 

for the speed differences between the CPU and the PCI bus.    When Disabled, the writes are not 

buffered and the CPU must wait until the write is complete before starting another writing cycle…                     

The choice: Enabled, Disabled. 

3-9.17  PCI Dynamic Bursting 

When Enabled, every write transaction goes to the write buffer.    Burstable transactions then 

burst on the PCI bus and non-burstable transactions don’t.. 

The choice: Enabled, Disabled. 

3-9.18  PCI Delay Transaction 

The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles.   

Select Enabled to support compliance with PCI specification version 2.1       

The choice: Enabled, Disabled. 

Содержание PM-V06































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды