AGP LY16 Скачать руководство пользователя страница 4

4

ensure these are connected and properly used.

 

Use of dust collection can reduce dust-related 
hazards.

4) POWER TOOL USE AND CARE

a. 

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed.

b.  Do not use the power tool if the switch does 

not turn it on and off.

 Any power tool that 

cannot be controlled with the switch is 
dangerous and must be repaired.

c. 

Disconnect the plug from the power source 
and/or the battery pack from the power 
tool before making any adjustments, 
changing accessories, or storing power 
tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of 

c h i l d re n  a n d  d o  n o t  a l l ow  p e r s o n s 
unfamiliar with the power tool or these 
instructions to operate the power tool.

 

Power tools are dangerous in the hands of 
untrained users.

e.  M a i n t a i n   p o w e r   t o o l s .   C h e c k   f o r 

misalignment or binding of moving parts, 
breakage of parts and any other condition 
that may affect the power tool’s operation. 
If damaged, have the power tool repaired 
before use.

 Many accidents are caused by 

poorly maintained power tools.

f. 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control.

g.  Use the power tool, accessories and tool 

b i t s  e tc. ,  i n  a cco rd a n ce  w i t h  t h e s e 
instructions, taking into account the 
working conditions and the work to be 
per formed.

 Use of the power tool for 

operations different from those intended 
could result in a hazardous situation.

5) SERVICE

Have your power tool serviced by a qualified 
repair person using only identical replacement 
parts.

 This will ensure that the safety of the power 

tool is maintained.

Symbols used in this manual

V…….......volts
A…….......amperes
Hz……......hertz
W……......watt
~………....alternating current

n

0

………..no load speed

min

-1

….....revolutions or reciprocation

  

per minute

......warning of general danger

 .….class II tool        

.......read these instructions

......always wear eye protection

......always wear a dust mask.

 .....always wear hearing protection  

 .....wear safety-approved hard hat

......Keep hands clear – pinching hazard.           

  
 

DANGER! Keep hands away from cutting 
area and the blade.

  

rotating parts - entanglement hazard. Keep

  

hands, loose clothing and long hair away

  

from moving parts

do not dispose of electric tools,  accessories 
and packaging together with household 
waste material

Содержание LY16













Отзывы: