AGP EV160 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 24

AGP EV160 Скачать руководство пользователя страница 8

8

REMOVING THE PADDLE-

ENSURE THAT TOOL IS DISCONNECTED FROM POWER SOURCE.

Double paddle models only:

Pull outwards the knurled quick release collar (65) and pull the paddle outwards to remove
the paddle. See Fig.2.

All other models:

Using the open-end wrench (40) on the flats on the spindle (01) and stabilizing the mixing
paddle (41), loosen and then unscrew the paddle from the spindle. See Fig.1.

STARTING AND STOPPING TOOL

Make sure that the power circuit voltage is the same as that shown on the specification
plate of the machine and that switch is “OFF” before connecting the tool to the power
circuit.

Double paddle models only:

WARNING: Before starting, always first place the paddles in or
above the mixing medium before starting. Never start the
mixer outside of the media.
First squeeze the safety interlock switch (93) on the left
handle, then squeeze the trigger switch (34) on the right
handle to start the machine. Since it is very dangerous for the
hand to be caught between the double paddles, the safety
interlock switch ensures that both hands are always on the
handles. See Fig.4.

All other models:

To start the machine, squeeze the trigger switch. Release the
trigger switch to stop the motor. See Fig.5.
This machine is equipped with a lock-on arrestor pin. If
continuous operation is required, squeeze the trigger and
press the arrestor pin. To stop, squeeze and release the
trigger switch.

Fig.4

Fig.5

Trigger switch
with lock pin

Trigger switch

Safety interlock switch

«
...
6
7
8
9
10
...
»

Содержание EV160

























Отзывы:

Нет отзывов