manualshive.com logo in svg

AGP CS200, Оригинальное руководство пользователя

Поделиться
Скачать
AGP CS200 Скачать руководство пользователя страница 4

4

d.  Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury.

e.  Do not overreach. Keep proper footing and balance at all times. This enables better control of 

the power tool in unexpected situations.

f. 

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves 
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g.  If devices are provided for the connection of dust extraction and collection facilities, ensure 

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a.  Do not force the power tool. Use the correct power tool for your application. The correct power 

tool will do the job better and safer at the rate for which it was designed.

b.  Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot 

be controlled with the switch is dangerous and must be repaired.

c. 

Disconnect the plug from the power source and/or the battery pack from the power tool 
before making any adjustments, changing accessories, or storing power tools. Such preventive 
safety measures reduce the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children and do not allow persons unfamiliar with 

the power tool or these instructions to operate the power tool. Power tools are dangerous in the 
hands of untrained users.

e.  Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts 

and any other condition that may affect the power tool’s operation. If damaged, have the 
power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. 

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking 

into account the working conditions and the work to be performed. Use of the power tool for 
operations different from those intended could result in a hazardous situation.

5) SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This 
will ensure that the safety of the power tool is maintained.

Symbols used in this manual

V…….......volts
A…….......amperes
Hz……......hertz
W……......watt
~………....alternating current

n

0

………..no load speed

min

-1

….....revolutions or reciprocation per minute

Содержание CS200





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды