45
ADJUSTING THE LED-BACKLIT DISPLAY
Item
Function
Operation
Range
Control Panel
Remote Control
OSD TIMEOUT
Sets the length of time (in
seconds) the OSD screen
is displayed. When the time
elapses, the OSD screen is
automatically inactivated.
Note:
The default value is
15
sec.
Press the or
button [for SC-17AH/
SC-19AH/SC-32AH
model] or the or
button [for SC-22AH/
SC-24AH/SC-42AH
model] to set the value.
Press the or
button [for SC-32AH
model] or the or
button [for SC-42AH
model] to set the value.
5 sec to 120 sec
GREEN MODE
Reduces the screen backlight
when the LED-backlit display
is inactive.
Note:
The default value is
OFF.
GREEN MODE
can be set to:
• ON
(
5 min
to
10 min
)
-
The screen will reduce the
backlight to 80% if inactive
within 5 to 10 minutes.
• OFF -
The function is off.
Press the or
button [for SC-17AH/
SC-19AH/SC-32AH
model] or the or
button [for SC-22AH/
SC-24AH/SC-42AH
model] to set the value.
Press the or
button [for SC-32AH
model] or the or
button [for SC-42AH
model] to set the value.
OFF
5 min to 10 min
ANTI-BURN-IN
Prevents image retention
(burn-in). When
ANTI-
BURN-IN
is set to
ON
,
the below message is
displayed on the screen.
INFORMATION
ANTI-BURN-IN
Note:
The default value is
OFF.
ANTI-BURN-
IN can be set to:
• ON -
Every after an
hour an Anti-Burn-In
scan line appears on
the screen moving
from the top edge
towards the bottom
edge of the screen with
an interval one second.
ANTI-BURN-IN scan line
• OFF -
The function is off.
Press the or
button to select
ANTI-BURN-IN
and
then press the
button.
Press the or
button to select
ANTI-BURN-IN
and
then press the
Menu
button/
OK
button.
OFF
ON
