AGM PYTHON-MICRO, Руководство пользователя

Страница: 22 / 28

22 AGM Global Vision
2.3 OPERATING
2.3.1 TURNING THE DEVICE ON
Open the objective lens cover.
NOTE
The objective lens cover protects the scope from inadvertent exposure to extremely
high levels of radiant flux. Never leave the scope without confirming that the objective
lens is covered.
To turn the unit on push and hold the operation joystick.
2.3.2 FOCUSING
Adjusts the eyepiece diopter first. Rotate the eyepiece focus ring until the image
becomes sharp. Then bring the object into focus. Rotate the front lens until the image
becomes clear and sharp.
2.3.3 SHUT DOWN OPERATIONS
To prepare the device for storage:
1. Turn the device OFF. Push and hold the operation joystick.
2. Place the protective cover over the objective lens.
3. Disconnect the cable or adapters (if applicable). Place the protective caps over the
connector sockets.
4. Return the scope and any accessories to the case.
2.3.4 MAINTENANCE
1. Gently brush off any dirt from the body of the device using a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the external surfaces
(except lenses).
3. Dry any wet surfaces (except lenses) using another dry, clean, soft cloth.
4. Using a lens brush, carefully remove all loose dirt from the lenses.
5. Dampen a cotton swab with ethanol and slowly, gently wipe down the lenses. Clean
the glass surfaces using circular movements, starting from the center of the lens and
moving out towards the edge, without touching the lens holder. Change the cotton
swab after each circular stroke. Repeat this step until the glass surfaces are clean.
2.3.5 PREPARING FOR EXTENDED STORAGE
To prepare the Python-Micro for extended storage:
1. Remove the batteries.
2. Clean the device and accessories.
3. Place all items into the storage case.