AGM PA-15, Инструкция по эксплуатации

Страница: 15 / 42

15
MODEL 250-C WELD GUN
INSTALLING OR CHANGING SPRING
A. Unscrew the end cap from the gun housing.
B. Unscrew stop nut from the end of gun shaft.
C. Unscrew the spring retainer and remove the washer from the housing.
D. Remove the spring from the shaft.
E. Slide the desired spring over the shaft.
F. Replace the washer onto the end of the gun housing.
G. Screw the spring retainer into the housing.
H. Screw the stop nut onto the end of the gun shaft.
I.
Screw the end cap onto the gun housing.