AGM Global Vision
18
2.2.8 BORESIGHTING
Enable the reticle to aim at the target. Hold
button in the view mode for 4
seconds, to display or hide the reticle.
1. Hold
button to show the menu.
2. Select Reticle menu item. A reticle shows in the center of the view.
3. Press
or
buttons to select one of 5 reticle type. Then press
button to confirm.
NOTE:
The scale intervals of the Reticle 4 changes synchronously under the current
digital zoom. The value of one scale interval of the Reticle 4 is 6.75 MOA.
You can boresight the scope by moving the reticle on screen:
1. In Reticle menu press
,
,
and
buttons to move the reticle
position. The coordinate shows the current position of the reticle.
2. Hold
button to save and exit.
TABLE 2-5. BORESIGHT CORRECTIONS
MODEL
ADJUSTMENT
VALUE
RETICLE
OFFSET
BORESIGHT INCREMENT
RATTLER TS25
1 click
1 pixel
0.26 mil / 0.89 MOA /
2.54 cm on 100m distance /
0.91 in on 100 yd distance
RATTLER TS35
1 click
1 pixel
0.18 mil / 0.63 MOA /
1.82 cm on 100m distance /
0.66 in on 100 yd distance
FIGURE 2-7. RETICLE PATTERNS
RETICLE 1
RETICLE 2
RETICLE 3
RETICLE 4
RETICLE 5
FIGURE 2-8. BORESIGHT CORRECTION
Cursor Type : Reticle 1
