AGM Global Vision PVS-14, Руководство пользователя

Страница: 18 / 40

18 AGM Global Vision
2.2.9 INSTALLATION OF THE HEAD MOUNT WITH A PROTECTIVE MASK
Perform the following to put the head mount on with a protective mask.
1. Place the protective mask on your head per the instructions provided with the protective mask.
WARNING:
When installing the head mount over the protective mask, be careful not to break the protective
mask seal around your face.
2. To install the head mount assembly, see the instructions in Paragraph 2.2.6.
NOTE:
It may be necessary to remove the brow pad when wearing the head mount over a protective
mask.
2.2.10 INSTALLATION OF THE WEAPON MOUNT
To install the weapon mount:
CAUTION:
The PVS-14 is not a weapon sight. However, it can be used in conjunction with a collimated dot
sight or laser aiming device.
NOTE:
If you intend to mount the device to a weapon, AGM recommends replacing the eyecup with an
eye guard for additional safety and comfort.
1. Adjust the monocular and weapon mount as shown in Figure 2-8. Align the alignment boss on
the weapon mount with the alignment groove in the monocular.
2. Screw in the thumbscrew to secure the monocular to the weapon mount.
3. Loosen the clamping knob on the weapon mount. Position the weapon mount, now secured with
the monocular, onto the weapon’s mounting rail. Turn the clamping knob to tighten.
WEAPON MOUNT
ALIGNMENT BOSS (HIDDEN)
THUMBSCREW
CLAMPING KNOB
FIGURE 2-8. WEAPON MOUNT USAGE