AgLand MACERATOR 6610, Руководство оператора

Страница: 8 / 20

Specifi cations
Dimensions
Overall Width 10’6” (315 cm)
Length 11’4” (345 cm)
Height operation 3’6” (105 cm)
transport 5’6” (165 cm)
Weight 3,800 lbs. (1,633 kg)
Tires (4)
Tire Size 11 L - 15 SL
Pressure 138 kPa (20 PSI)
Wheel Hub 6 bolt
Wheel Torque 85 ft. lbs. (115.2 NM)
Pickup
Width 5’6” (165 cm)
Clearance* 14” to 16” (35.5 cm to 40.5 cm)
Tooth Clearance** 10” to 12” (25 cm to 30 cm)
Pickup Tooth Spacing 2.75” (7 cm)
*Under pickup when raised.
**When raised.
Rolls
Width of rubber feed rolls 5’6” (165 cm)
RPM of rubber feed rolls 645 RPM
Min. space between rubber rolls 1/16” (1.6 mm)
Width of steel rolls 5’6” (165 cm)
RPM of top steel roll 1372 RPM
RPM of bottom steel roll 1514 RPM
Min. space between steel rolls 1/32” (.8 mm)
Tractor Requirements
Suggested min. tractor size* 80 HP (60 KW)
Suggested min. under frame clearance** 15” (38 cm)
*Tractor should be of suffi cient size to maintain operator con-
trol in all situations.
**To allow swath to fl ow freely under tractor.
AgLand Macerator
Model 6610
Air System
Size of air pressure tank 12 Gallon (46 L)
Max. air pressure in tank 120 PSI
Hydraulic outlets required 1
Operating Speed
Approximate range* 8 to 16 km/hr (5 to 10 MPH)
*Depending on crop conditions.
Swath Size
Width up to 5’ (150 cm)
Cut Width
Recommended Width 14’ to 16’ (480 cm)
Capacity
Up to 50 ton/hr
Some weights and measurements are approximate.
All specifi cations, statements, and information shown in
this manual are believed to be accurate at the time of print-
ing. Specifi cations are subject to change without notice.
7