AGL Eero 6, Техническое руководство

Страница: 13 / 29

How to hard and soft reset eero
You can perform a hard or soft reset by pressing and holding the reset button on the
back of an eero for a certain length of time. The eero Beacon reset button can be found
on the left side and the same instructions below apply. Before resetting an eero make
sure it has been powered on for at least 45 seconds.
You can use the reset button to perform two distinct actions - a soft reset and a hard
reset.
Soft Reset
A soft reset will clear all network configurations from eero but preserve its sessions. This
keeps the eero on the network and saves its logs and advanced settings such as IP
reservations and port forwarding configurations.
To soft reset an eero, hold the reset button until its LED flashes yellow (7 seconds), then
release it. After a few moments, the eero LED should return to solid white and appear
with a green outline in the eero App.
Hard Reset
A hard reset will clear all network configurations, clear its sessions and logs, and remove
the eero from the network. If the eero has an active internet connection, you can achieve
the same results by removing the eero from the network via the eero App.
Note: If you perform a hard reset on a gateway eero (the one connected to the modem or
upstream device), it will remove the entire network and all settings for that network. If you