9
9. Restore your gas supply and check ALL of the connections for leaks using a solution of soapy
water. If a leak is discovered and any bubbles are seen, close the main gas valve and re-tighten
ALL of the connections. NEVER USE A FLAME TO CHECK FOR GAS LEAKS!
Step5
10. Stick the conversion label on the rating plate as shown in Figure 10.
Metal Rating Plate
Conversion Label
BATTERIES
Make sure the control knob is in the "OFF" position. Unscrew the
push button cap on the ignition module located on the control
panel to access the battery compartment. The ignition module
requires one Alkaline AA size battery. The negative (-) end goes in
first. See Figure 11. Dispose of the battery safely as it may
explode or leak if charged or disposed of in a fire. Make sure of the
polarity. Mercury and cadmium free.
CAUTIONS: BATTERY INSTRUCTIONS
●
Always purchase the correct size and grade of battery most suitable for the intended use.
●
Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
●
Clean the battery contacts and also those of the device prior to battery installation.
●
Ensure the batteries are installed correctly with regard to polarity (+ and -).
●
Remove batteries from equipment which is not to be used for an extended period of time.
●
Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check the internet or your local
phone directory for local recycling centers and / or follow local government regulations.
Serial
Number
_________________ Model
Number:
ARK13000
PIN: 0063CT7348
Appliance Type A Country: GB
Minimum clearance from combustible constructions: Rear: 60.9 cm. Top 182.8 cm.
This appliance has been converted to use Natural Gas G20.
2H @ 20 mBar Nom. Heat Input (gross) 16KW High, 4.0 kW Low
Figure 10
Figure 11
