10
MAINTENANCE
The flames should look like those in Figure 12. To clean the
burner,
use a soft brush after the burner has cooled
completely. Never use a vacuum cleaner on the burner. It is
recommended to store the fire pit indoors during winter if it will
be subjected to freezing temperatures. The LP cylinder must
be disconnected and removed from the appliance before the
appliance can be stored indoors.
Figure 12
LIGHTING INSTRUCTIONS
Warning: If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
1. Read instructions before lighting.
2. Push and turn the knob to ON.
3. Hold ignitor to light the burner, release control knob after 15 seconds; if burner does not light,
wait 5 minutes, repeat.
4. Adjust flame to desired flame with the control knob. See Figure 13.
BURNER COVER ASSEMBLY
Place the burner cover on the table top as shown in Figure14.
WARNING: BEFORE PLACING THE BURNER COVER ON, MAKE
SURE THE FIREPIT HAS BEEN SHUT OFF AND THE BURNER HAS
COMPLETELY COOLED DOWN.
Figure 14
IGNITER BUTTON
CONTROL KNOB
Figure 13
